vzik
Посмотри этот мануал, раздел 7-3.
А вот алгоритм действий
Re: Upgrading PSU in Elite 8200
Options
02-09-2012 10:07 PM
Hi, you can use a ATX-PSU if you do some rewiring:
1: The 4-pin cpu contact is ok as it is.
2: Clip the 12v, -12v and GND from the 24pin ATX and wire it to the 6-pin MB contact (color coded)
3: Take the "Pwr good" from the ATX- contact and put it on the small 6 pin HP special contact (grey I think) (clip the others on this special contact)
4: Use a external switch to ground the green "Ps_ON" from the PSU ATX contact.
5: Set in bios that it will start automatically after power loss.
Now you can start the computer via the new external switch.
А вот алгоритм действий

Re: Upgrading PSU in Elite 8200
Options
02-09-2012 10:07 PM
Hi, you can use a ATX-PSU if you do some rewiring:
1: The 4-pin cpu contact is ok as it is.
2: Clip the 12v, -12v and GND from the 24pin ATX and wire it to the 6-pin MB contact (color coded)
3: Take the "Pwr good" from the ATX- contact and put it on the small 6 pin HP special contact (grey I think) (clip the others on this special contact)
4: Use a external switch to ground the green "Ps_ON" from the PSU ATX contact.
5: Set in bios that it will start automatically after power loss.
Now you can start the computer via the new external switch.